How to Install Cabinet Door Pulls
Once you finish a cabinet remodel you still need to install the new cabinet pulls. There are a few simple tricks to use to ensure the job goes quickly, smoothly and will look great. So here’s a quick guide on how to install cabinet door pulls.
The first thing you’ll need to do is figure out just where you want to put up the new door pulls. Use a little bit of paste to tack the first cabinet pull up onto the cabinet door. You can adjust the pull up, down, left or right until it looks just right.
Now go to the furthest cabinet and stick up another knob in the same general location. Adjust it until it’s in line with the first handle you stuck into place.
Grab a chalk line and a buddy.
Snap the chalk line across the row of cabinets above and below the two knobs you stuck up with the paste. This gives you a reference point for the height of the door pulls. You won’t have to worry about them sitting uneven on the door fronts.
Now you can just measure how deep the door pull is from the edge of the cabinet and you have the measurements you need to install all of the cabinet door pulls.
Now you’ll want to construct a quick template so that all the pulls go up in the same location.
Grab a piece of wood and mark off the offset you just measured.
Drill holes through the wood that line up with the cabinet door pull and attach bolts.
Now you can take the template and hold it up to cabinet door. Stick a pencil through the door and mark the front of the cabinet.
Next use a cordless drill to put holes in all the cabinet doors at the same time. This will save you time from having to switch out between screwdriver and drill after each cabinet.
Once you drilled out all the pilot holes grab one of the bolts from the cabinet and use it as a test fit. Increase the size of your drill bits until you reach the size of the bolt.
Go back and enlarge all the holes to the same size.
Now you can put down the drill and switch to the screwdriver for good.
Slide each bolt through the back of the cabinet doors. Use the screwdriver to tighten the cabinet pulls to the door facing. You don’t want to crank down too hard on the screws you’ll risk stripping the screws and warping the door pulls.
All that’s left to do is clean up all the saw dust from the drilling. Just vacuum it all up and you’re finished!
Hopefully this guide on how to install cabinet door pulls will make your remodeling job a little easier. These are but a few tips to make the job go smoothly. Just snap a few chalk lines make a template and you’ll have new cabinet pulls up in a few short hours.
Author Jennifer Akre is an owner of a wide variety of online specialty shops including that offer both items and information on how you can easily furnish and decorate your space. Whether it is knobs for your bathroom or cabinet hardware for your kitchen there are many tips you can use to make those spots both functional and beautiful. Click today and indulge your senses.
Article Source: http://EzineArticles.com/?expert=Jennifer_Akre
Kitchen Design Basics – Cabinet Drawer Hardware
Cabinet drawer hardware is one aspect of cabinet design where there are many options. In this article we will outline some of the more common option for cabinet drawer slides.
Epoxy Coated Drawer Slides
These are the most common type of slide and ones you will see on all the inexpensive cabinets available at the large home improvement centers. These are the default slide that you will also see in most new subdivision developments. Available for as little as $2 in bulk, they are serviceable, but do not provide any of the desirable features of the hardware listed below.
Side Mounted ball-bearing slides
These are a good mid-range option. Much stronger than the epoxy coated slides, they also add a substantial feel to the drawer slide operation. These are available with a full access option, meaning that the drawer will pull out the full depth of the drawer, unlike the the epoxy slides which only partially open.
Under mount Slides
These are the most popular slide upgrade. They are the most visually pleasing as all of the hardware is out of sight since its mounted under the drawer. These too are available with a full-extension option. Many also feature a soft-close feature which has become quite popular. When paired with a dovetailed drawer, these are synonymous with the highest quality cabinets.
While the drawer slide selection may seem like a minor consideration, in reality spending an extra few dollars on upgraded hardware can greatly improve the utility and convenience of your cabinets.
| Paul Eden is a mechanical engineer who enjoys home improvement projects. He also has recently written about induction cookware and portable induction cooktops.
Article Source: http://EzineArticles.com/?expert=Paul_Eden |
What You Need to Know Before Buying Kitchen Cabinets
Your home is a representation of you, and in it you have probably spent thousands of man hours and thousands of dollars to make it the home that you always wanted. Many people focus on their bedrooms and basements before turning their eye to the kitchen, but when the inevitable comes it is almost certainly a home-changing event. The kitchen, as you can imagine, is the most popular room in your home. Yes, the kitchen and the main bathroom are the two rooms that will be the most trafficked. Your kitchen, of course, will be used by all members of the household, and the bathroom will be as well. These two rooms should be the two that look the best, even if it’s just for appearances sake.
When it comes down to choosing kitchen cabinets that suit your needs there are a few things that you should know beforehand:
1. Ensure that proper support is in place
Different materials and types of wood have different weights, so it is important that you verify (or have your contractor verify) that the new cabinets can be installed without error. The last thing that you want to see is your brand new kitchen cabinets suddenly becoming dislodged for seemingly no reason.
The area that they are going to be installed should have appropriate amounts of supporting materials in and behind the wall, and everything should be quite snug and strong.
2. Have an overall vision in mind
Chances are that you may be buying your cabinets before you have finished the countertops, paint, floors, etc. It’s important to have an overall idea of what you are trying to achieve, as any one piece may look out of place until you’ve made the whole
3. Durability is an important factor
When you are choosing your kitchen cabinets you should base that decision on a few things: value, price, aesthetics, function, and durability. Kitchen cabinets are a rather expensive addition to your home, and you want to know that the $10,000 or more that you’ve just spent on cabinets will last you more than a couple of years.
Look for cabinets that are well made, treated in advance to avoid warping, and are coated to prevent damage from small amounts of water or other liquids. The cabinet doors should be relatively solid and stable, and the hinges should also be well made.
Knowledge is power, so be sure to research before you jump into a decision-making process. Learn as much as you can about the cabinets that you are considering before you put any money down, and definitely check on the history of the contractors who will be installing them as well as the company that will be supplying them.
SOURCE: www.elegantcab.com
Recent Posts
Categories
